Selecting A Standard Display - Sennheiser SK 100 G3 Instructions Manual

The current state of the muting function or the RF signal is displayed on
the display panel of the bodypack transmitter:
Audio signal is muted
Transmitter's display panel:
Audio signal is activated (muting is canceled)
Transmitter's display panel:
RF signal is deactivated
Transmitter's display panel:
RF signal is activated
Transmitter's display panel:
You can also deactivate the RF signal on switch-on. For more
information, refer to the chapter "Switching the bodypack trans-
mitter on/off" on page 11.
Using the ON/OFF button, you can also activate/deactivate the RF
signal during operation. To do so, briefly press the
and proceed as described on page 11.

Selecting a standard display

Press the rocker button to select a standard display:
Contents of the display
543.200 MHz
ew100 G3
P MUTE
AF
B.Ch: 20.12
543.200 MHz
P
MUTE
AF
ew100 G3
B.Ch: 20.12
P
MUTE
AF
Using the bodypack transmitter
"MUTE" is displayed
"MUTE" is not displayed
Transmission icon is not
displayed
Transmission icon is displayed
ON/OFF button
Selectable standard display
"Frequency/Name"
"Channel/Frequency"
"Channel/Name"
13