Adjusting Settings Via The Operating Menu; The Main Menu "Menu - Sennheiser SK 100 G3 Instructions Manual

Adjusting settings via the operating menu

Adjusting settings via the operating
menu
Make use of the possibility to adjust settings via the operating
menu of your receiver and to transfer these settings to the body-
pack transmitter. For more information, refer to the instruction
manual of the receiver. The relevant information is marked with
the sync icon.
For more detailed information on the operating menu, visit the
SK 100 G3 product page at www.sennheiser.com.

The main menu "Menu"

Adjusting the input sensitivity – "Sensitivity"
SET
S e n s i t i v i t y
Menu
S e n s i t i v i t y
–12 dB
Call up Select the desired
"Sensitivity" setting
"Stored"
Adjustment range: 0 to 60 dB, adjustable in steps of 3 dB
The transmitter's audio level display "AF" always indicates the audio level,
even if the bodypack transmitter is muted, e.g. allowing you to check the
adjusted sensitivity before live operation.
B.Ch: 20.12
543.200 MHz
P
MUTE
AF
Input sensitivity
adjusted ... Effect/display
... too high Close talking distances, speakers with loud voices
or loud music passages cause overmodulation in
the transmission link. The yellow
lights up. The audio level display "AF"
deflection for the duration of the overmodulation.
... correctly The audio level display "AF"
deflection only during the loudest passages.
... too low The transmission link is undermodulated. This
results in a signal with high background noise.
The following figures are a guide to the best settings:
Transmission situation
Loud music/vocals
Presentations
Instrument input
Electric guitars with
single coil pickups
Electric guitars with
humbucker pickups
Guitars with active electronics
(active pickups, active EQs,
piezo pickups)
S e n s i t i v i t y
– 12 dB –36 dB
Store the setting
SET
´
AF PEAK LED
shows full
shows full
Sensitivity setting
30 to 21 dB
21 to 0 dB
30 to 24 dB
45 to 30 dB
45 to 30 dB
´
17