Zoom Settings - Raymarine FishFinder L265 Instruction Manual

Zoom
magnification Press the > arrow on the Page control pad to select x2, x4,
x6, or x8 Zoom magnification. At this point you may press
to return to the normal display or you may press
CLR
the arrow on the Page control pad to select Auto or
Manual Zoom.
Auto zoom Once you have set the zoom magnification, you may select
either auto or manual zoom control. Select auto zoom, and
the FishFinder will automatically control the position of the
Zoom window. The auto zoom control constantly tracks the
bottom contour, and adjusts the position of the Zoom
window accordingly with changes in depth. This feature is
particularly useful when fishing for species of fish which
stay close to the bottom. Use the
Page control pad to select auto zoom. Press the
on the Page control pad to leave this display, and store the
auto zoom setting.
Manual zoom If you select manual zoom, you can choose the position of
the zoom area yourself. Use the < and > arrows on the
Page control pad to select manual zoom.
Once you make this choice, you can set the zoom area
yourself. You do this after you exit the Zoom Settings
display, and you are looking at the Zoom display itself. You
can manually move the Zoom area up or down by pressing
the and
location of the zoom area is shown by the dark vertical line
at the very right-hand edge of the display.
Setup Instructions
Fig. 4-6

Zoom Settings

<
and
arrows on the Page control page. The
>
arrows on the
arrow
51