Operating Instructions; Controls On Display Unit; Display Panel - Raymarine FishFinder L265 Instruction Manual

3 – Operating Instructions
In this section of the manual, we will explain how to operate the unit.
(Setup instructions are included in the next section.) Below is a drawing
of the display unit.
Raymarine
Display area

Controls on Display Unit

The FishFinder is designed to be easy to use while the boat is moving.
You can steady your hand by gripping the right side of the display with the
fingers of your right hand. This will allow you to use your right thumb to
press the buttons on the display.
Notice that some of the buttons can be used in two ways. They do one job
during a normal display, and a different job when you are setting up the
unit. In this section, we will use the symbols
indicate the power, setup and clear buttons.
PWR
This button turns the power on and off.
To turn on the power – Press once to turn the power on.
To enter the Lamp/Contrast menu – Press
any time to enter the "Lamp/Contrast" menu.
To turn off the power – If you press and hold the button,

Operating Instructions

Power button
PWR
Page control
pad
PAGE
Set-up button
SETUP
Clear button
CLEAR
FISHFINDER
L265
, and
SETUP
PWR CLEAR
PWR
Fig. 3-1
Display
Panel
to
quickly at
23