Operating Pages - Raymarine FishFinder L265 Instruction Manual

Adjust contrast You can also adjust the "contrast" of the display. This is a
measure of how light or dark the display appears. Use
the control to move from the line for "Lamp On/Off" to
the line for "Contrast." Use the
the contrast. (The FishFinder unit has a feature which
adjusts the contrast automatically to compensate for
changes in air temperature.)
Save settings When the settings on this display are correct, press the
button to save the settings and go to the FishFinder
CLEAR
page.

Operating Pages

This unit has 5 "pages" or normal displays. These can be used to show
different kinds of information. Here is a list of the modes:
Mode
FishFinder page
Zoom page
A-Scope page
Digital page
Sidelooker page
(using optional
Sidelooker transducer)
You can step from one of these pages or displays to another using the
< and > arrows on the Page control pad. See Fig. 3-3.
There are two other kinds of displays you can see here:
• The system includes several setup displays which can be used to
change some of the controls used by the unit. See Section 4.
• When the Simulator Mode is switched on, the unit generates its own
display without receiving signals from the transducer. This mode is
used for sales and training.
Operating Instructions
< >
or
Function
Standard operating mode, good
general coverage of bottom.
Magnified view of smaller section
of bottom.
Detailed view of area under
transducer.
Numerical display of depth
View of either side of centerline of boat,
(used only with Sidelooker transducer)
controls to adjust
See page
page 28
page 37
page 39
page 41
page 42
27