Zoom - Raymarine Dragonfly-4 DV Installation And Operation Instructions Manual

• The Directional controls can be used to scroll
through the available menu options.
• Pressing the Ok button selects the highlighted
option or confirms and dismisses pop up
messages.
• pressing the Back button returns to the previous
menu or closes the menu.
Placing a waypoint
Displays with a GPS / GNSS receiver can use
waypoints to mark points of interest.
1. Use the Directional controls to highlight the
desired location with the cursor.
2. Press the OK button.
The context menu is displayed.
3. Select Place Waypoint.
A confirmation pop up message is displayed.
4. Select Ok to place the waypoint, or Edit to edit
the waypoint details.
A waypoint is placed at the cursor's location.
Context menu
A context menu is available on displays with a GPS /
GNSS receiver, which provides data and shortcuts
to menu items.
The context menu provides the position of the cursor:
• Depth
• Range
The context menu also provides the following menu
items:
• Place Waypoint
Accessing the context menu
You can access the context menu by following the
steps below.
1. Use the Directional controls to highlight an
object or area.
2. Press the OK button.
The context menu is displayed.
Fishfinder applications

8.5 Zoom

The Zoom function displays more detail onscreen by
magnifying a specific area of the image.
When using Zoom the screen is split and displays
the zoomed image alongside the standard image.
Sonar application
This enables you to:
• select an area from the standard view that is
magnified and displayed alongside.
• increase and decrease the zoom level.
The zoomed section is indicated on the standard
screen by the zoom box.
Adjusting the Zoom level
To adjust the Zoom level and area follow the steps
below.
With the standard view displayed:
1. Pressing the + button to enable Zoom mode.
2. Subsequent presses of the + button will increase
the Zoom level
3. Pressing the – button will decrease the Zoom
level and finally revert to the standard view.
Selecting a Zoom area
When using Zoom the area displayed in the
magnified area of the screen can be changed.
With Zoom enabled:
1. Use the Up and Down Directional controls to
move the magnified area up and down through
the water column.
DownVision application
63