Selecting Sonar Mode - Raymarine DSM300 User Manual

14

2.3 Selecting Sonar Mode

If properly connected to an hsb
display unit, you can begin viewing echo sounder data by setting the display to
Sonar mode.
Note: Data, such as depth, speed, temperature, log, and trip are still available even if So-
nar mode is not selected.
➤
To set the mode, press the DISPLAY key to show the DISPLAY pop-up, then
DISPLAY
press again to cycle through the modes available, shown in Figure 2-1.
099 o
2.410
RADAR
Figure 2-1: Using the DISPLAY Key
The selected mode is shown by an icon with a black (monochrome display) or red
(color LCD) border and the mode is displayed on the screen.
When SONAR mode is shown (as in Figure 2-1), press ENTER or CLEAR. The
default soft keys are displayed. The display shows the sounder screen.
2
PLUS Series Radar, Chartplotter or Fishfinder
CHART SONAR
ft
DSM300 Operation with PLUS Series Displays
0
0
LOG
60
D6191-1