Raymarine DSM300 User Manual page 45

Chapter 4: Basic Display Controls
Table 4-1: Horizontal Half-Screen Window Options
Full-screen
mode
Radar Mode
Data Log Mode
• Chart display : If data is available on the display or via the hsb
can be displayed.
• Radar display : If data is available on the display or via the hsb
can be displayed.
• Depth/temp graph (Sonar mode only): This shows a plot water tempera-
ture and depth against time.
• CDI : This gives the Course Deviation Indicator graphical display, with data
relating to the target waypoint.
• BDI : This gives the Bearing and Distance Indicator graphical display, with
data relating to the target waypoint.
• Nav Data (Chart or Radar mode): This shows sixteen data boxes, providing
navigational data in the units specified in your set up.
➤
To select a Horizontal half-screen window for display:
1. From the full-screen Sonar mode, press the DISPLAY key. The following soft
keys are displayed with an image of each available window:
DISPLAY
2. Set SPLIT to HOR. To select a different window, press either SELECT WIN-
DOWS soft key until the desired window is highlighted. If necessary, press
WINDOWS OFF ON to toggle Windows on.
3. Press ENTER .
4. To toggle Windows off, press the WINDOWS OFF ON soft key.
If any data boxes were displayed at the bottom of the full-screen image, they are
switched off until you return to full-screen mode.
Note: You can use the SCREEN soft key in chart mode to switch the data boxes on. They
are displayed in the upper window.
Figure 4-2 and Figure 4-3 show the half-screen horizontal windows (in Sonar
mode).
Horizontal Half-Screen
Window Options
CDI, BDI, Nav Data, Chart, Sonar
Half-screens not available
45
2
PLUS link, it
2
PLUS link, it
D5011-1