Table of Contents
Advertisement
22
Figure 2-5: Simulator Mode Setup
Viewing Simulator Data
After you have properly connected and powered up the DSM300 and display
units, you can toggle Simulator mode on and off using the Sonar Setup menu.
➤
To view simulated sounder images:
1. Press the MENU key on display unit.
MENU
The Setup soft keys appear.
2. Press the SONAR SET UP soft key.
The Sonar setup menu pop-up is displayed.
3. Use the trackpad to move the selection bar over the option
SONAR SIMULATOR. The simulator soft keys are displayed.
4. Press the ON soft key to switch on the sonar simulator.
5. Press ENTER twice to return to the default display.
When simulator mode is on a simulator dialog box is displayed.
When the display is switched off then on again, simulator mode is maintained. It
is recommended that you select the System Set Up Menu and switch off simulator
mode when you have finished.
Note: Any waypoints placed on the chartplotter in simulator mode are retained in the da-
tabase list and are available for use in routes.
DSM300 Operation with PLUS Series Displays
D7470-1
Hide quick links:
Advertisement
Table of Contents
