Table of Contents
Advertisement
PostScript3 printer driver - Setting Up for Printing
Print Setting Details
The necessary print settings, such as paper size or print orientation, can be set
when printing from applications.
1
The print settings in the applications become the initial settings of the applica-
tion.
[Page Setup] tab
Use this tab to make paper related settings.
❖ [Paper Size:]
Select the size of the paper to be printed.
Limitation
❒ All of the paper sizes which are registered on Windows NT 4.0 are dis-
played. However, do not select paper sizes that cannot be used by this
printer.
Note
❒ You can set custom paper sizes when selecting [PostScript Custom Page Size].
See p.37 "Printing on custom sized paper".
❖ [Paper Source:]
Specify a paper feed tray where the paper to be used is loaded.
Note
❒ Select "Paper Feed Tray" here.
❖ [Print on Both Sides(Duplex Printing)]
Prints on both sides of sheets, Select one of the following settings:
• None
Disables Duplex Printing.
• Long Side
Prints output so that you can open it from the long edge when bound along
the long edge.
• Short Side
Prints output so that you can open it from the short edge when bound
along the short edge.
Limitation
❒ Duplex printing is possible on the following paper sizes only: A4K, 8
11"K and B5 JISK. If other sizes are selected, the machine will print them in
normal printing mode.
❖ [Color Appearance:]
Normally, selecting "Color" is recommended.
32
" ×
1
/
2
Advertisement
Table of Contents
