Ricoh PostScript3 Operating Instructions Manual page 14

PostScript3 printer driver - Setting Up for Printing
❖ [Print Job]
When select to "Store file", the print data is stored in HDD on the machine.
Limitation
❒ To apply the specified finishing procedures: on the [Paper] tab, set [Orienta-
1
tion] to [Portrait]. Finishing procedures (such as duplex printing) for data
that accumulates while [Orientation] on the [Paper] tab is set to [Landscape]
cannot be completed as specified. To apply the specified finishing proce-
dures: on the [Paper] tab, set [Orientation] to [Portrait].
❒ The [Orientation] setting of some applications (such as MS Word) overrides
the driver's [Orientation] setting. However, the driver's [Orientation] setting
overrides the [Orientation] setting of other applications (such as Notepad
and WordPad.)
Note
❒ You can set a file name and the password for the data.
❒ Pages created using tabulation or similar applications must be sent sheet
by sheet. The book printing functions cannot be used with data created by
such applications.
❒ Settings that can be made on the machine (Paper feed tray, Number of
prints, etc.) become invalid, even if specified by the printer driver. For de-
tails, see Operating Instructions.
❖ [User Code:]
Use this to set a user code for print logging.
Enter a user code using up to eight digits. A user code identifies a group of
users and allows you to check the number of sheets printed under each code
with SmartDeviceMonitor for Admin.
Reference
For more information about using SmartDeviceMonitor for Admin, see the
Help file.
10