Pioneer Elite VSX-LX301 Basic Manual page 63

> Specifications > Specifications > Settings > Settings > Listening Modes > Playback Function
• It cannot be set if the listening mode is Direct or Pure
Direct.
• The setting cannot be used in the following cases.
– If "Loudness Management" is set to "Off" when
playing Dolby Digital Plus or Dolby TrueHD
– When the input signal is DTS and "Dialog Control" is
other than 0 dB
Center Spread :
Adjust the width of the sound field of the front channel
when playing in the Dolby Surround listening mode. To
spread the width of the sound field to the left and right, set
to "On". To concentrate sound in the center, set to "Off".
• Depending on the speaker settings, this becomes "Off".
Dialog Control :
You can increase the dialog portion of the audio in 1 dB
steps up to 6 dB so that you can make dialog easier to
hear over background noise.
• This cannot be set for content other than DTS:X.
• We plan to provide support for the DTS:X audio format
through a firmware update for this unit. Center Image is
displayed until the update.
• The effect may not be selectable with some content.
> Listening Modes > Playback Function > Basic Manual > Basic Manual
Troubleshooting Appendix Troubleshooting Appendix
| |
31 31