Table of Contents
Advertisement
> Specifications
> Specifications
> Settings
> Settings > Listening Modes > Playback Function
• To name a preset radio station, press TUNER on the remote controller, select AM/FM and select the
preset number.
• This cannot be set if the "NET" "USB" or "BT AUDIO" input is selected.
■ Audio Select
Select the priority for input selection when multiple audio sources are connected to one
input selector, such as connections to both the "BD/DVD" HDMI IN jack and the "BD/DVD"
AUDIO IN jack. The setting can be separately set to each input selector. Select the input
selector to configure.
Setting Item
Default Value
Audio Select
BD/DVD:
HDMI
CBL/SAT:
HDMI
GAME:
HDMI
STRM BOX:
HDMI
AUX:
HDMI
CD:
COAXIAL
TV:
OPTICAL
PHONO:
Analog
> Listening Modes > Playback Function
Setting Details
"ARC": When giving priority to input signal from
ARC compatible TV.
• The setting can be selected only when "System
Setup" - "Hardware" - "HDMI" - "Audio Return
Channel" is set to "Auto" and also the "TV" input
is selected.
"HDMI": When giving priority to input signal from
HDMI IN jacks
• The setting can be selected only when the input
is assigned to the HDMI jack in the "System
Setup" - "Input/Output Assign" - "HDMI Input"
setting.
"COAXIAL": When giving priority to input signal
from DIGITIAL IN COAXIAL jacks
• The setting can be selected only when the input
is assigned to the COAXIAL jack in the "System
Setup" - "Input/Output Assign" - "Digital Audio
Input" setting.
"OPTICAL": When giving priority to input signal
from DIGITIAL IN OPTICAL jacks
• The setting can be selected only when the input
is assigned to the OPTICAL jack in the "System
Setup" - "Input/Output Assign" - "Digital Audio
Input" setting.
"Analog": To always output analog audio
independently of the input signal
• The setting can be selected only when the input
is assigned to the AUDIO IN jack in the "System
Setup" - "Input/Output Assign" - "Analog Audio
Input" setting.
Setting Item
Default Value
Setting Details
Fixed PCM
Off
Select whether to fix input signals to PCM (except
multi-channel PCM) when you have selected
"HDMI", "COAXIAL", or "OPTICAL" in the "Audio
Select" setting. Set this item to "On" if noise is
produced or truncation occurs at the beginning of
a track when playing PCM sources. Select "Off"
normally.
• The setting cannot be changed when "TUNER", "NET", "USB", or "BT AUDIO" input is selected.
> Basic Manual
> Basic Manual
Troubleshooting Appendix
Troubleshooting Appendix
• Changing "Audio Select" changes the setting to "Off".
|
|
15
15
Advertisement
Chapters
Table of Contents
