Pioneer Elite VSX-LX301 Basic Manual page 50

> Specifications > Specifications > Settings > Settings > Listening Modes > Playback Function
Setting Item Default Value
Network Standby On
Bluetooth Wakeup Off
• Wait for a while if "Network Standby" and "Bluetooth Wakeup" cannot be selected. It will appear
when the network feature is started.
18 18
> Listening Modes > Playback Function
Setting Details
When this feature is turned "On", you can turn
on the power of the unit via the network using an
application such as iControlAV5 that can control
this unit.
• When "Network Standby" is used, the power
consumption increases even when the unit
is on standby. However, the increase in
power consumption is kept to a minimum by
automatically entering the HYBRID STANDBY
mode, where only the essential circuit is
operating.
• "Network Standby", which suppresses power
consumption, may be disabled when the
network connection is lost. Use the power
button on the remote controller or main unit to
turn the unit on if this happens.
This function wakes up the unit on standby by
connecting a BLUETOOTH enabled device.
"On": Use this function
"Off": Do not use this function
• Setting to "On" increases the power
consumption even when the unit is on standby.
However, the increase in power consumption
is kept to a minimum by automatically entering
the HYBRID STANDBY mode, where only the
essential circuit is operating.
• This setting is fixed to "Off" if "Network/
Bluetooth" - "Bluetooth" - "Auto Input Change"
is set to "Off".
■ 12V Trigger A
Set when outputting the control signal (maximum 12V/100mA) through the 12V TRIGGER
OUT A jack. Different settings can be set for each input selector. You can enable power link
operation when you connect the unit and the external devices equipped with 12V trigger
input jack.
Setting Item Default Value
BD/DVD Off
CBL/SAT Off
GAME Off
STRM BOX Off
HDMI 5 Off
HDMI 6 Off
> Basic Manual > Basic Manual
Troubleshooting Appendix Troubleshooting Appendix
Setting Details
Set the 12V trigger output setting to each input.
"Off": No output
"Main": Output when "BD/DVD" is selected as input
source for the main room.
"Zone2": Output when "BD/DVD" is selected as
input source for ZONE2.
Set the 12V trigger output setting to each input.
"Off": No output
"Main": Output when "CBL/SAT" is selected as
input source for the main room.
"Zone2": Output when "CBL/SAT" is selected as
input source for ZONE2.
Set the 12V trigger output setting to each input.
"Off": No output
"Main": Output when "GAME" is selected as input
source for the main room.
"Zone2": Output when "GAME" is selected as input
source for ZONE2.
Set the 12V trigger output setting to each input.
"Off": No output
"Main": Output when "STRM BOX" is selected as
input source for the main room.
"Zone2": Output when "STRM BOX" is selected as
input source for ZONE2.
Set the 12V trigger output setting to each input.
"Off": No output
"Main": Output when "HDMI 5" is selected as input
source for the main room.
Set the 12V trigger output setting to each input.
"Off": No output
"Main": Output when "HDMI 6" is selected as input
source for the main room.
| |