Siemens SIMATIC HMI IFP Operating Instructions Manual page 4

Industrial flat panels
Table of Contents

Advertisement

Preface
The devices IFP1900 PRO and PRO IFP2200 are referred to as "PRO devices".
At some places in these operating instructions, the general term "Windows Embedded
Standard" is used to refer to "Windows Embedded Standard 2009" and "Windows
Embedded Standard 7". "Windows 7" is used as an abbreviation for "Windows 7 Ultimate".
Figures
This manual contains figures of the described devices. The supplied device might differ in
some details from the figures. Within some of the figures, one device is used to represent all
Industrial Flat Panels.
History
The following earlier release versions of these operating instructions have been published:
Edition
09/2012
06/2014
11/2014
06/2015
07/2015
07/2016
11/2016
11/2017
09/2019
4
Comment
First Edition
Description of devices with capacitive multi-touch screen
Update with IPC Wizard 2.1 and corrections
The description of the following devices has been added:
SIMATIC IFP1900 PRO for pedestal (extendable, flange bottom)
SIMATIC IFP1900 PRO for support arm (not extendable, flange top)
SIMATIC IFP1900 ETH, IFP2200 ETH
Corrections
The description of the following devices has been added:
SIMATIC IFP1900 PRO for support arm (extendable, round tube)
SIMATIC IFP2200 PRO for pedestal (extendable, flange bottom)
SIMATIC IFP2200 PRO for support arm (not extendable, flange top)
SIMATIC IFP2200 PRO for support arm (extendable, round tube)
Additions:
System components for PRO devices: Extension Unit
Mounting of PRO devices for support arm (extendable, round tube) on a 48.3 mm
round tube
Information on USB interfaces of Ethernet Monitors
Information about standards, certificates and securing of cables for Ex approval
Corrections
SIMATIC IFP1900 PRO and SIMATIC IFP2200 PRO: Dimensions for die-cast
aluminum housing updated.
Additions:
System components for PRO devices: further Extension Units and PRO options
"Removing the device" description supplemented
Position of the mounting clips for 22" built-in unit
Notes on UL and FM approvals
IFP, IFP PRO, IFP ETH
Operating Instructions, 09/2019, A5E31298376-AJ

Advertisement

Table of Contents
loading

This manual is also suitable for:

Simatic hmi ifp proSimatic hmi ifp eth

Table of Contents