Preface - Siemens SIMATIC HMI IFP Operating Instructions Manual

Industrial flat panels
Table of Contents

Advertisement

Preface

These operating instructions contain all the information you need for commissioning and
operation of the SIMATIC Industrial Flat Panel IFP.
It is intended both for programming and testing personnel who commission the device and
connect it with other units (automation systems, programming devices), as well as for service
and maintenance personnel who install add-ons or carry out fault/error analyses.
Basic knowledge required
A solid background in personal computers and Microsoft operating systems is required to
understand this manual. General knowledge in the field automation control engineering is
recommended.
Scope of the operating instructions
These operating instructions apply to the following industry Flat Panels with the article
numbers 6AV7863-.....-0... and 6AV7863-.....-1...:
● SIMATIC IFP1500, IFP1900, IFP2200
● SIMATIC IFP1900 ETH, IFP2200 ETH
● SIMATIC IFP1900 PRO, IFP2200 PRO
Scope of this documentation
The SIMATIC Industrial Flat Panel is supplied with the following documents:
● In printed form: Quick Install Guide for the device, Installation and Commissioning
Instructions
● Electronically as PDF file on the "Documentation and Drivers" CD/DVD:
– Operating instructions Industrial Flat Panels IFP, IFP PRO, IFP ETH
– Operating Manual SIMATIC Industrial PC Panel Drivers and Tools PDT
Conventions
In these operating instructions, the SIMATIC IFP is also referred to as "Flat Panel" or
"device".
The devices SIMATIC IFP1900 ETH and IFP2200 ETH are also referred to as "Ethernet
Monitor" and "ETH version".
A touch device generally refers to a device with a touch screen, as opposed to a pure
"display device". Touch screen is the general term for a capacitive multi-touch screen and
resistive single touch screen.
The devices IFP1500, IFP1900, IFP2200, IFP1900 ETH and IFP2200 ETH are referred to as
"built-in units".
IFP, IFP PRO, IFP ETH
Operating Instructions, 09/2019, A5E31298376-AJ
You can find the Operating Manual in the PDT installation directory after PDT has
been installed.
3

Advertisement

Table of Contents
loading

This manual is also suitable for:

Simatic hmi ifp proSimatic hmi ifp eth

Table of Contents