Clear The Spray Tip - WAGNER PROCAT 9185G Owner's Manual

Spraying
Troubleshooting -
Clear the
Spray Tip
Start
You will need:
• Scrap material / cardboard
Do not attempt to unclog or
clean the tip with your finger.
High pressure fluid can cause
injection injury.
3
SPRAY
3. Make sure the PRIME/
SPRAY knob is turned to
SPRAY.
Unlock the spray gun.
English
1
1. Lock the spray gun.
4
4. Point at a piece of scrap material /
cardboard and squeeze trigger until
material comes out in a high pressure
stream. Release the trigger and lock the
spray gun.
12
2
2. Rotate spray tip 180 degrees from its
current position.
5
5. Rotate spray tip forward to one
of the SPRAY positions.
Unlock the spray gun and
resume spraying.
Note: If spray tip is difficult
to rotate, relieve pressure
by 1) slowly turn PRIME/
SPRAY knob to PRIME, 2)
unlock the spray gun and
3) squeeze trigger while
pointing at scrap material/
cardboard. Release
trigger, lock the spray gun,
and try rotating spray tip
again.
OR
NARROW
OR
WIDE