Clear the
Spray Tip
1
1
Start
What you'll need
• Scrap material/cardboard
Do not attempt to unclog or
clean the tip with your finger.
High pressure fluid can
cause injection injury.
5
6
ON
5. Turn knob to SPRAY
6. Turn power ON
English
2
4
3
OFF
2. Release trigger and lock
4. Rotate reversible spray tip 180 degrees to
spray gun
CLEAN position (arrow pointing toward rear of
3. Turn power OFF
spray gun)
7
8
7. Unlock spray gun
8. Point at scrap material/cardboard and
squeeze trigger until material comes out in a
high pressure stream. Release trigger and lock
spray gun
Solutions if Experiencing Spray Issues • Clear the Spray Tip
Solutions if Experiencing Spray Issues
Note: If spray tip is difficult
to rotate relieve pressure
by turning PRIME/SPRAY
knob to PRIME and squeeze
trigger while pointing at scrap
material/cardboard. Release
trigger and try rotating spray tip
again
9
9. Reverse spray tip so arrow
points forward and resume
spraying
13