Table of Contents
Advertisement
OPERATING INSTRUCTIONS – INTERNAL CONTROL PANEL
The control panel enables you to view and modify all the features and options on your
Wine Cabinet.
Temperature control
When the Wine Cabinet is turned on for the first time, the control panel will display the
●
actual temperature of the cabinet.
The system will automatically cool both zones to their default temperature setting of
●
12°C (ideal for long term storage). This will take between 1 – 2 hours.
The temperature zones are independently controlled and do not change with the
●
temperature or humidity of the surrounding; whether summer or winter.
The Wine Cabinet can be set to any temperature between 5°C and 20°C in each zone to
●
accommodate your wine storage requirements.
If you wish to alter the temperature of either zone, this can be easily done by using the
●
internal control panel.
Internal control panel
Adjusting the temperature of each zone
Press and hold the 'Temp Zone'
1
on the display will indicate whether the upper or bottom zone is selected.
To change zones press the 'Temp Zone'
2
The temperature may be altered by pressing the
3
of these buttons will increase or reduce the temperature by one °C or °F.
When the desired temperature is displayed, wait 5 seconds, the blinking will stop and
the temperature will be set.
To switch between temperature units of °C and °F, press and hold the 'Light'
4
3 seconds.
button for 3 seconds. The zone temperature blinking
button once.
or
buttons. One press on either
icon for
15
Advertisement
Table of Contents
