Interior
For ease of cleaning, empty the Wine Cabinet first and remove all shelves.
●
Wipe interior surfaces using only liquid dishwashing detergent dissolved in warm water
●
and a soft lint-free cloth. Rinse with clean water and dry with a clean, lint-free cloth.
Do not use harsh chemicals, abrasives, ammonia, chlorine, bleach, concentrated
●
detergents, solvents or abrasive scouring pads on any part of your Wine Cabinet.
SOME of these chemicals may dissolve, damage and/or discolour the interior of your
Wine Cabinet.
Roller shelves
When cleaning use a dry clean, lint-free cloth to wipe over surfaces. Do not use warm
●
water or any cleaners as this will damage the shelves' oak characteristics and cause
them to warp and stain.
If the shelves are lightly stained by spilt wine or water allow the surface to dry, then
●
using 200 grade sandpaper gently sand over the stain until removed.
If shelves are heavily stained, over time the colour of the shelf will darken and warp,
●
and may eventually require replacing. Replacement shelves are available from your
Fisher & Paykel trained and supported service technician.
Remove roller shelves
Pull the shelf towards you extending
1
the telescopic runners, making sure
the shelf is empty (refer to A).
Hold the front and back edge of the
2
shelf firmly and lift vertically to unclip
from securing hooks (refer to B).
Pull the shelf towards you to remove.
3
Push both telescopic runners back
4
into the Wine Cabinet.
Repositioning roller shelves
Push both telescopic runners back into the Wine Cabinet.
1
Align the shelf on top of the securing hooks and push the shelf down until you feel it clip.
2
Ensure the shelf is securely clipped onto the telescopic runners before use.
3
IMPORTANT!
Telescopic runners are pre-lubricated, and will not need to be re-lubricated during
their life. Do not attempt to clean the grease from the runners, as this will affect their
ability to function. Do not immerse the runners in water.
CLEANING CARE – INTERIOR
A
B
21