Chapter 3 Turn On And Off The System; Turn On The System - JRC JCY-1950 Instruction Manual

Chapter 3 Turn On and Off the System

3.1 Turn On the System

1. Start the Recording Control Unit (RCU)
1) Unlock and open the front door.
2) Turn on the POWER switch.
3) After approximately 2 minutes, make sure that the MCB's LED (SYS., REC.) lights up in
green.
SYS.
Figure 3-1 LED position of the MCB
Chapter 3 Turn On and Off the System
REC.
Expansion
11