Table of Contents
Advertisement
4. During the recording is stopped, tap the [RECORD STOP/START] button in the SAVE screen.
The RECORD START screen is displayed.
5. Enter the password and tap the [Enter] button. The data recording is restarted.
[Information]
The factory default password is "0000". Manage the password by the ship administrator.
About how to enter a number, see "4.1.5 Number input".
Completion message
[NOTE]
If the data recording is restarted, the alert disappears.
SAVE screen
RECORD START screen
Figure 4-76 RECORD START screen
Figure 4-77 Restart data recording
Chapter 4 Operation Method
81
Advertisement
Table of Contents
