3. During the normal self-test, the test indicator will blink.
4. If the self-test is successful, the Strobe light will flash once.
5. If the self-test detects a fault in the EPIRB module, the test indicator LED will start flashing at
the end of the test.
Test sequence
NORMAL
SELF-TEST Started
Signals
Transmitted
RLS enabled*1
Extended self-test
successful
If one of the above tests are unsuccessful, the remaining test sequences will not be performed, and the test indicator will
indicate self-test failure.
Self-test
failure
*1:For EPIRBs with RLS (Return Link System) disabled the RLS indicator will remain off.
*2:See the Table 5-2 for on failure indications.
Position indicator
―
―
―
―
Chapter 5 About Float-free Capsule
RLS indicator
Test indicator
―
Multiple short
―
●
One for 1 second
―
Strobe light
〇
On
●●●
Off periods
―
―
One flash
〇〇〇
Multiple
flashes*2
―
―
―
93