Add Or Remove Channels From Tv/Vcr's Memory; Set The Time And Date (Clock) - RCA T25062 User Manual

Startup
10. Add or remove channels from the TV/VCR's memory

11. Set the Time and Date (Clock)

You may want to add or remove channels if some of them are not
active, have weak signals, or you do not want them in your channel
memory. A channel that has been removed can still be selected by
pressing the remote control's number buttons.
A. Tune to the channel you want to add or remove and press MENU
on the remote to display the TV/VCR MAIN MENU.
B. Press 5 to display the SETUP menu.
C. Press 2 to display the ADD/REMOVE CHANNELS screen.
D. Follow the directions on the screen to add or remove a channel.
E. Add or remove more channels by entering the channel number or
pressing CHAN up or down.
There are two ways to set the time and date: manually, and with the
Auto Clock Feature. If you entered your Time Zone and Daylight
Savings Time in step 6, the Auto Clock Feature will set the clock
automatically. If the Auto Clock Set fails, you'll see a message that
says, "The Auto Clock Set was unsuccessful." You'll want to set the
clock manually if this happens.
To set the Time and Date (Clock) manually:
A. From the TIME menu, press 1 to display the SET CLOCK screen.
B. Use the number buttons on the remote to enter the time.
• Press 0 before 1; 0 is added automatically before all other
numbers. Press 1 for AM or 2 for PM. Example: For a time of
1:07 PM, press 0, then 1, then 0, then 7, then 2.
C. Use the number buttons on the remote to enter the date.
• The day of the week will automatically appear after you enter
the year.
• Press CLEAR on the remote at any time to change incorrect
entries.
D. Press MENU on the remote to start the clock.
E. To exit and return to TV viewing, follow the on-screen instructions.
F. To display the time and date, press DISPLAY on the remote.
Note: If you fail to set the time, you will need to do so before setting
program recordings or using the sleep or wake-up timers.
In case of a power interruption, the time display shows – : – –. Set the
clock again.
Setting Up the TV/VCR
TV/VCR MAIN MENU
1 Screen
2 Time
3 Timer Recordings
4 Parental Controls
5 Setup
SETUP
1 Auto Channel Search
2 Add/Remove Channels
5