Place Your Tv/Vcr On A Stable Surface; Connect Antenna Or Cable-Tv System; Plug In The Tv/Vcr; Turn On The Tv/Vcr - RCA T25062 User Manual

Startup

3. Place your TV/VCR on a stable surface

CAUTION: To reduce the risk of personal injury or damage to the
TV/VCR, take care in selecting a surface or stand on which to place
your product and when moving or carrying it. Use a stable surface
or a strong steady stand and a location where the TV/VCR cannot
be tipped over or easily pulled off, particularly by children. Do not
attempt to carry or move this product with one hand. Grasp the
TV/VCR with both hands with the TV front against your body to
prevent it from slipping out of your grasp.

4. Connect antenna or cable-TV system

Connect a home antenna or a cable-TV system. Details on pages 29-32.

5. Plug in the TV/VCR

Remove the plastic safety cord from the AC Plug. Then plug the power
cord into the wall outlet, matching the wide blade of the plug with the
wide slot in the outlet. Be sure to insert the plug completely.

6. Turn on the TV/VCR

Press POWER on the front of the TV/VCR or press TV or VCR on the
remote. The indicator in the POWER button on the front of the
TV/VCR will light when the TV/VCR is on. The On-Screen Display
will request your Time Zone and Daylight Savings Time information.
6a.

Set the Time Zone

1. Select your time zone from the list.
Note: To set the Time Zone at any other time, press MENU on the
remote to display the TV/VCR MAIN MENU. Next, press 2 to display the
TIME menu, then press 4 to set the Time Zone.
6b. Set the Daylight-Savings Time
Note: To set the Daylight Savings Time at any other time, press MENU
on the remote to display the TV/VCR MAIN MENU. Next, press 2 to
display the TIME menu, then press 5 to set the Daylight Savings Time.
Press MENU to start the Automatic Clock Set. This may take several
minutes.
Note: If a power interruption occurs after the Auto Clock Set has set the
clock, the clock display shows – : – –. Turn off the TV/VCR for a few
minutes and the Auto Clock Set will re-set the clock. If you set the clock
manually, you must reset it manually after the power interruption.
• If you choose "Don't know" the TV/VCR will automatically set
the time as accurately as possible.
1. Select one of the options.
• If you choose "Don't know" the TV/VCR will automatically set
the Daylight Savings Time as accurately as possible.
Setting Up the TV/VCR
3