Connect Antenna Or Cable System Without A Cable Box - RCA T25062 User Manual

Hooking Up the TV/VCR

Connect Antenna or Cable System Without a Cable Box

A. Dipole Antenna
Follow these steps to connect a dipole antenna
to your TV/VCR. Do not connect a dipole
antenna if you plan to connect a different type
of indoor or outdoor antenna or cable system.
This connection may require additional
accessories not provided.
1. Insert the antenna base into the slot on
the back of your TV/VCR.
2. Connect the twin-lead ends of the
antenna to the screw terminals of an
antenna adapter.
3. Connect an antenna adapter to the IN
FROM ANTENNA jack on the back of the
TV/VCR.
4. Plug in the TV/VCR's power cord.
5. Turn to pages 2-5 for "Setting Up the
TV/VCR."
Adjust the length and position of the antenna
rods for the best reception.
• For viewing VHF channels, extend the
rods fully.
• For UHF viewing, shorten the rods.
B. Outside Antenna, Set-top
Antenna, or Cable System
Without a Cable Box
1. Connect as shown.
This connection may require additional
accessories not provided.
2. Plug in TV/VCR's power cord.
3. Turn to pages 2-5 for "Setting Up the
TV/VCR."
30
A
Dipole Antenna
Antenna Slot
Antenna Adapter
IN FROM
ANTENNA
INPUT
AUDIO VIDEO
B
Match Your Type of Antenna or Cable
OR
Antenna
Adapter
INPUT
AUDIO
Twin-Lead Ends
Back of TV/VCR
OR OR
Antenna
Mixers
IN FROM
ANTENNA
VIDEO
Back of TV/VCR