TV/VCR Features
Using the TV/VCR Features
On-Screen Displays
When you change channels, adjust volume, or use
a VCR feature, on-screen displays appear to let
you know the status of the TV/VCR.
To Call Up On-Screen Displays
1. Press DISPLAY to display the function, time
2. Press DISPLAY again:
Adjust the Video
To Adjust Video
1. Press MENU on the remote to display the
2. Press 1 to display the SCREEN menu.
3. Press 1 to display the PICTURE QUALITY
4. Press 1 to display the ADJUST PICTURE
5. Press CHAN up or down to select the function
6. Press VOL < or > to adjust the function selected.
To Return Video to the Factory Settings
counter, date, time, and tape speed.
If you do not press DISPLAY again, these
displays will time out and disappear.
• No tape in TV/VCR: Displays are removed.
• Tape in TV/VCR: Time counter remains on
screen, and will not time out. Press DISPLAY
again to remove the time counter.
Use the SCREEN menu to adjust the picture for
your personal preference. The TV/VCR will
remember the settings you select.
TV/VCR MAIN MENU.
menu.
QUALITY menu.
you want to adjust.
• Select Color to adjust color intensity.
• Select Tint to adjust for natural fleshtones.
• Select Contr (contrast) to adjust picture
contrast.
• Select Brite (brightness) to adjust picture
brightness.
• Select Sharp (sharpness) to adjust picture
sharpness.
From the PICTURE QUALITY menu, press 2. Press
RESET to reset the video to the levels set at the
factory.
The message "All picture controls have been
reset to factory defaults" will appear.
Press DISPLAY
with no tape
inserted.
Press DISPLAY
with tape
inserted.
Press DISPLAY
again with tape
inserted.
9