Sleep Timer; Wake-Up Timer - RCA T25062 User Manual

Rca t25062: user manual
Hide thumbs Also See for T25062:
Table of Contents

Advertisement

TV/VCR Features
Using the TV/VCR Features

Sleep Timer

1. Press MENU on the remote to display the TV/VCR MAIN MENU.
2. Press 2 to display the TIME menu.
3. Press 2 to display the SLEEP TIMER screen.
4. Press CHAN up or down to select 30, 60, 90, or 120 minutes.
5. Press MENU three times to exit.
6. To cancel the sleep timer, first display the SLEEP TIMER menu

Wake-Up Timer

The timer turns the TV/VCR on at a desired time. You can set it to
wake you up in the morning or remind you that a favorite program
is about to start. Please note that the clock must be set for you to use
the Wake-Up Timer. If it isn't, a prompt appears to warn you that
the clock is not set. Follow the on-screen instructions to set the
clock.
1. Press MENU on the remote to display the TV/VCR MAIN MENU.
2. Press 2 to display the TIME menu.
3. Press 3 to display the WAKE-UP TIMER menu.
4. Use the number buttons to enter the channel number and time.
5. Press MENU to set the timer.
Note: When the wake-up timer turns on the TV/VCR, the volume
level does not change from when the TV/VCR was last turned off.
6. To cancel the wake-up timer, first display the WAKE-UP TIMER
The sleep timer automatically turns the TV/VCR off after 30, 60, 90,
or 120 minutes.
1. Press SLEEP on the remote to select 30, 60, 90 or 120 minutes.
2. To cancel the sleep timer, press SLEEP until the timer
disappears.
You can also access the sleep timer through the menu system.
While watching a program, press DISPLAY to check the amount
of time remaining before the TV turns off.
by repeating steps 1-4 above. Then, repeatedly press CHAN up
or down until 0:00 is displayed on the screen.
• After you enter the time, press 1 for AM or 2 for PM. Example:
For a time of 5:07PM, press 5, then 0, then 7, then 2.
• Press CLEAR to correct an entry or RESET to clear the timer.
• The wake-up timer will turn on the TV/VCR every day. The
WAKE-UP indicator light on the front panel is illuminated
when the wake-up timer is set.
• Once the TV/VCR is turned on by the wake-up timer, the
unit automatically turns off after 60 minutes if no buttons
are pressed.
menu by repeating steps 1-3 above. Then, press RESET to cancel
the timer, and press MENU to exit. The timer is also canceled if
MENU is pressed before step 4 is completed.
11

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tv/vcr combination

Table of Contents