Express Recording - RCA T25062 User Manual

Recording a Program

Express Recording

Express recording lets you record up to four hours or to the end of the tape without programming
the timer. You can begin recording immediately. The TV/VCR will stop automatically at the end
of the recording.
How to Use Express Recording
1. Insert a tape with safety tab in place.
2. Select the channel to be recorded.
3. Press SPEED to select a recording speed.
4. Press REC twice to activate express recording.
5. Press REC repeatedly until the desired amount of
The TIMER indicator on the TV/VCR's front panel will
light during express recording.
During express recording, press REC to display the time
remaining on the screen. Press REC again to increase the
recording time.
Stopping an Express Recording in Progress
Press and hold STOP/EJECT on the TV/VCR or STOP on
the remote to stop the express recording.
Repeatedly press REC until RECORD LENGTH: 0:00
appears. The recording stops after a few seconds.
24
The TV/VCR will turn on.
To record from the AUDIO/VIDEO IN jacks, press 00.
Pressing 00 once tunes the TV/VCR to the
AUDIO/VIDEO1 input jacks on the rear of the TV/VCR.
Pressing 00 twice tunes the TV/VCR to the
AUDIO/VIDEO2 input jacks on the front of the
TV/VCR.
You can also change the speed of the recording
in progress.
recording time is displayed.
Each time you press REC, the recording time increases
as shown below:
Display
— OR —
Press Recording
REC Time
(
0:30 30 Min)
1:00 (1 Hr)
1:30 (1 Hr, 30 Min)
2:00 (2 Hrs)
3:00 (3 Hrs)
4:00 (4 Hrs)
0:00:00 (Normal Record)
0:00 (Turns Off)