Tascam DR-10L Pro Owner's Manual page 33

NOTE
o Since the app remembers the CONNECTED list, the previous
state will be shown the next time it is launched.
o New devices cannot be found if there is device data for 99
units already. Device data can be removed from the DEVICE
SETTINGS Screen to enable finding new devices. See the
DR-10L Pro CONNECT manual for how to remove devices.
4.
Tap the device that you want to connect.
It will be added to the CONNECTED list.
NOTE
o Up to 5 devices can be added to the CONNECTED list.
o Tap a device shown in the CONNECTED list to return it to the
AVAILABLE list.
Example with 5 devices added to the list
When a device is added to the CONNECTED list, it will begin connection
standby and connection will automatically be attempted.
11 - Remote control functions
A check will appear when connection completes.
NOTE
o If the UNIT NAME has been set on the DEVICE SETTINGS Screen,
the UNIT NAME data will be registered on the unit after connection
completes.
o If a different UNIT NAME is already saved on the unit, the following
pop-up will appear.
Example when the UNIT NAME in the app is "TEST1" and
the UNIT NAME on the unit is "TEST2"
NO Set the app UNIT NAME ("TEST1") as the unit
name on the DR-10L Pro unit.
YES Set the DR-10L Pro UNIT NAME ("TEST2") as the
unit name in the app.
o If a UNIT NAME has been set on the DR-10L Pro unit but not in
the app, the UNIT NAME set on the unit will be added to the
app settings.
TIP
When recording a TV drama or play, for example, setting UNIT
NAME to the individual names of each performer can make
identification easier when managing files and editing.
TASCAM DR-10L Pro V1.00
33