Table of Contents
Advertisement
Sewing Mode
Display in Sewing Mode
Sewing Mode is the first view on the display after you turn on the machine. Here you will find all the basic information you need to
start sewing. This is also where you adjust the settings of your stitch. Straight stitch is selected by default.
Note: When the values/settings shown on the display are set to default, their corresponding figures/icons will be framed. If you change
the values/settings the frame around the figures/icons will be will be removed.
1. Mode indicator
2. Needle stop position — indicates if needle "UP" or
"DOWN" is active
3. Bobbin winding indicator — indicates that the bobbin
winding motor is activated
4. Recommended presser foot — indicates what presser foot
is recommended to use for the selected stitch to obtain the
best stitch result
5. Stitch number — the currently selected stitch
6. Buttonhole lever indicator — indicates that a buttonhole
is selected
7. Stitch width — the current width for the selected stitch
8. Stitch length — the current length for the selected stitch
Select a Stitch
Your machine has four stitch menus. Menu 1 includes the most
frequently used utility stitches, and are printed on the machine
next to the stitch selection buttons. Menus 2–3 have both utility
and decorative stitches. Menu 4 is a Font menu. Here, you will
find letters and numbers you can use to create sequences.
When you turn on your machine, stitch menu 1 is activated and
straight stitch (stitch no. 1) is selected (A).
Press "Stitch Menu" (B) to toggle between the stitch menus.
The currently selected menu is shown on the display (A).
The stitches on Menu 1 have a direct selection. Once Menu 1 is
selected, just press the button next to the stitch to select it
(C).
The stitches on Menus 2–4 are pictured on the Stitch Reference
Charts that slide out for viewing at the bottom of the machine.
The Stitch Menu number is listed within a folder above the
stitches (D). The Stitch Number is printed above the picture of
respective stitch (E).
By pressing the digits in quick succession you will be able to
select a stitch from 10 and up from the selected stitch menu (F).
If the stitch number does not exist in the selected menu you
will hear a beep and the latest selection will remain.
To select another stitch in the same menu just press the number
of the stitch.
To select a stitch in another menu you will first need to change
stitch menu and then select the stitch.
20 – Operating Your Machine
English
2
3
1
ABC
5
B
ABC
A
C
D
4
6
7
8
Advertisement
Table of Contents
