Table of Contents
Advertisement
INTRODUCTION
Intended Use
Optimal use and maintenance are described in these instructions. This product is not intended for industrial or commercial use.
Additional assistance, by region, may be found online at www.singer.com.
Machine Overview
4
3
2
1
1. Feed Teeth Lever — move from side to side to engage or
disengage the feed teeth. Positioned at the back of the free
arm.
2. Accessory Tray / Free Arm — provides a flat surface
when sewing and allows storage for your accessories. Re-
move the accessory tray to use the free arm which makes it
easier to sew, e.g., trouser hems and sleeves.
3. Thread Knife — for trimming thread ends at the end of
sewing.
4. Threading Slots — thread paths with tension discs and
take up lever.
5. Reverse Button — Press and hold to sew in reverse, e.g.,
when securing the beginning or ending of a seam.
6. Start/Stop Button — Press to start and stop sewing with-
out using the foot control.
7
8
5
6
7. Thread Tension Dial — adjustable for setting the desired
tension for your stitch, thread and fabric.
8. Machine Operation Controls — functions used to make
your sewing more convenient.
9. Display — Current stitch and settings are displayed.
10. Hand Wheel — used to manually control the movement of
the needle and the thread take-up lever.
11. Stitch Control Panel — Choose stitch menu, select stitch
and adjust your stitch settings with these buttons. Here you
also find functions for sequencing.
12. Stitch Charts — Slide forward and view all stitches avail-
able on your machine.
9
Introduction – 1
10
11
12
English
Advertisement
Table of Contents
