Sequence Controls; Automatic Stop Setting; Needle Up/Down Setting; Sewing Mode - Singer HD 6700C Instruction Manual

Sequence Controls

Sequencing — Press to enter Sequence mode.
Navigation Arrows — Use these buttons to move back and forth in your sequence.
Repeat — Press to sew your sequence repeatedly.
Delete — Press to delete the selected stitch in a sequence.

Automatic Stop Setting

Press this button to activate the Automatic Stop setting. When active, the icon is lit on the display (see ). Use "Auto Stop" together
with the "Tie-Off". If you press the tie-off button when "Auto Stop" is activated, your machine will finish the current stitch, then
tie-off and stop automatically.

Needle Up/Down Setting

Press the needle stop up/down to set the position of the needle when you stop sewing. The needle will move up or down when you
press the button. When the needle stop down is set, a needle icon with an arrow pointing down is shown on the display. If needle
stop up is set, the arrow on the display is pointing up (see ). The default setting is Needle Up, and it will be activated each time the
machine is turned on.

Sewing Mode

Display — Sewing Mode
Sewing Mode is the first view on the display after you turn on the machine. Here you will find all the basic information you need
to start sewing. This is also where you adjust the settings of your stitch. Straight stitch is selected by default.
Note: When the values/settings shown on the display are set to default, their corresponding figures/icons will be framed (A). If you
change the values/settings the frame around the figures/icons will be will be removed.
1. Stitch number — the currently selected stitch
2. Recommended presser foot — indicates what presser
foot is recommended to use for the selected stitch to obtain
the best stitch result
3. Needle position — if the needle position is adjusted, the
active one is shown here
4. Needle stop position — indicates if needle "UP" or
"DOWN" is active
5. Auto-Stop is activated
6. Active stitch menu — what stitch menu is active
7. Stitch width — the current width for the selected stitch
8. Stitch length — the current length for the selected stitch
9. Buttonhole lever indicator— indicate that a buttonhole is
selected
10. Bobbin winding indicator — indicates that the bobbin
winding motor is activated
20 – Operating Your Machine
English
3
2
1
6 7
4
5
8 9 10