Table of Contents
Advertisement
S
p
ewIng
reparatIon
TOUCH PANEL LCD
When you turn on the power, the touch panel LCD will display
the Home Screen.
NOTE:
If the message show below appears, this means the needle
is not in correct position. Turn the hand wheel toward you to
raise the needle to its highest position. Then press the "✓"
button.
CAUTION
Do not press the screen too hard and do not use sharp
objects to touch it. Doing so can damage the screen.
Touch the screen with your finger only.
h
S
(a)
ome
creen
When you turn on the power, machine will display the Home
Screen (see below). Home Screen will indicate two buttons:
a. Sewing Mode Button
By pressing this button, you can select and sew stitch
pattern normally.
b. Sequence Mode Button
By pressing this button, you can combine stitch patterns
and letters easily by selecting each pattern or letter.
FOR SELECTING AND SETTING OF SEQUENCE MODE,
SEE PAGE 38.
NOTE:
If the embroidery unit is attached, a different Home Screen will
appear. Turn the machine off, then remove the embroidery unit.
(See page 42)
h
b
(b)
ome
utton
You can return to the Home Screen from any other view by
pressing the Home Button.
A
B
SEWING MODE
At the Home Screen, by pressing the Sewing Mode button,
machine will select straight stitch first. You can select and sew
all stitch patterns indicated in the Direct Selection Buttons and
the pattern chart located inside of the top cover.
NOTE:
It is not possible to sew when the embroidery unit is attached.
S
I
tItch
nformatIon
a. Stitch Pattern
The shape of stitch pattern will change according to
the setting of stitch length, width, mirror/reverse and
elongation.
b. Pattern Number
c. Recommended Presser Foot
Indicated presser foot is one of suggested foot for normal
sewing. You can use other presser feet as described in this
instruction manual.
d. Stitch Width/Needle Position
e. Stitch Length/Density
SELECTING A STITCH
By pressing one of the Direct Selection Buttons (0-9), you can
select that stitch number immediately.
Press two or three digits in quick succession to select a stitch
from 10 and up. If the stitch number does not exist, you will
hear a beep and the last entered stitch number will remain
selected.
a
b
13
b
c
a
d
e
Advertisement
Table of Contents
