Function Mode Of Sewing Machine - Thread Sensor Deactivated - Singer Futura Quartet FQ-4 Service Manual

Function mode of sewing machine
- thread sensor deactivated.
In order to check or set of the different functions on the machine without having it threaded there is a Func-
tion mode.
After entering the function mode all the diffrent sensors of the machine
- Thread break
- Presser foot lever
- Bobbin Thread
is de-activated and the machine will run without thread.
Handling
Go to the Function mode of the machine by pressing buttons (1) and (2) and
(5) while the main switch is switched on. See illustration below
Sewing function mode
In Function mode all stitches are the same as in Normal sewing mode.
Embriodery function mode
In Functions mode when operating the embroidery mode of machine, it must be connect to a PC through a
USB cable.
To run the machine use start/stop switch after the embroidery data is transfered to machine from PC.
ON
Singer Futura XL-400 , FQ-4 29