Environmental Conditions; Description And Components Location - Pentair Fleck 5810 XTR User Manual

User Guide Fleck 5810-XTR
3 . Description
3.1. Technical specifications
Pressure: ..........................................................Hydrostatic: 20 bar; Working: 1.4 - 8.6 bar
Maximum service flow rate (ΔP 1.72 bar): .......10.7 m
3.2.

Environmental conditions

• Maximum relative humidity 80% for temperatures up to 31°C decreasing linearly to 50% relative humidity at 40°C;
• main supply voltage fluctuations up to ±10% of the nominal voltage;
• temperature from 0 °C to 52 °C;
• not directly exposed to the sun;
• installed in a dry place.
3.3.

Description and components location

3.4. By-passing
If the system is equipped with a bypass and if a problem occurs, turn the valves to bypass the system as shown in the picture
below.
Normal operation
Softener System
In
6 / 52
3
/h
Display
Mixing device
Injector block
Out
Drain
Brine
Meter
Inlet
Outlet
In Bypass
Softener System
In Out
Ref. MKT-UG-018 / C - 09.10.2019