Terms And Conditions Agreement - Omron 3G3M1-STD Manual

1.3. Terms and Conditions Agreement

1 NO WARRANTY
1） The functions and function block Library is distributed as a sample in the hope that it will
be useful, but without any warranty. It is provided "as is" without warranty of any kind, either
expressed or implied, including, but not limited to, the implied warranties of merchantability
and fitness for a particular purpose. The entire risk as to the quality and performance of
the function block is with you. Should the function block prove defective, you assume the
cost of all necessary servicing, repair or correction.
2） In no event unless required by applicable law the author will be liable to you for damages,
including any general, special, incidental or consequential damages arising out of the use
or inability to use the function block (including but not limited to loss of data or data being
rendered inaccurate or losses sustained by you or third parties or a failure of the function
block to operate with any other programs), even if the author has been advised of the
possibility of such damages.
2 LIMITATION OF LIABILITY
1) OMRON SHALL HAVE NO LIABILITY FOR DEFECT OF THE SOFTWARE.
2) OMRON SHALL HAVE NO LIABILITY FOR SOFTWARE PARTS DEVELOPED BY THE
USER OR ANY THIRD PARTY USING THE FUNCTION BLOCK DESCRIBED ON THIS
MANUAL.
3 APPLICABLE CONDITIONS
USER SHALL NOT USE THE SOFTWARE FOR THE PURPOSE THAT IS NOT
PROVIDED IN THE ATTACHED USER MANUAL.
4 CHANGE IN SPECIFICATION
The software specifications and accessories may be changed at any time based on
improvements and other reasons.
5 ERRORS AND OMISSIONS
The information in this manual has been carefully checked and is believed to be accurate;
however, no responsibility is assumed for clerical, typographical, or proofreading errors, or
omissions.
4