Switching On/Off; Selection Of Audio/Video Source - RCA RTD101 User Manual

RTD101-EN receiver 11/25/02
Switching on /off
• To switch on the receiver, press POWER button on the
receiver once to enter standby mode. Press SOURCE
button on the receiver or one of the source buttons or
ON/OFF on the remote control to power on the receiver.
(See illustration below)
POWER
BAND/APP SOURCE
BASS/TREBLE
RANDOM SURROUND
• Standby: when the receiver is on, press the
ON/OFF on the remote to return to standby mode.
• To switch off the unit completely, press the POWER
button on the receiver.
NOTE
Your receiver has a back up memory to keep your
settings like preset radio station for about 2 weeks
in case electricity cut occurs. If the receiver is
unplugged for more than 2 weeks, all the settings
will be lost and re-setting will be necessary.
10:09 AM Page 17
BAND/APP
ON OFF TV
VCR
RANDOM
DVD•CD TAPE AM•FM SAT•CABLE
MUTE SURROUND
R
VCR ON OFF TV
DVD•CD TAPE AM•FM SAT•CABLE
MUTE SURROUND
Operating Your Receiver

Selection of Audio/Video source

When one of the audio/video source is selected, the audio
and video input corresponding to the name will be
activated.
The receiver acts as a switching device between all the
sources that are plugged into it.
BAND/APP SOURCE
BASS/TREBLE R
RANDOM SURROUND
Example 1:
If you connect a VCR player to the VCR input (audio +
video) on the receiver and press the SOURCE button
until VCR shows on the display. You will be able to have
the sound and image transmitted by the VCR.
BAND/APP SOURCE
BASS/TREBLE R
RANDOM SURROUND
EN
VCR ON OFF TV
DVD•CD TAPE AM•FM SAT•CABLE
MUTE SURROUND
VCR ON OFF TV
DVD•CD TAPE AM•FM SAT•CABLE
MUTE SURROUND
13