Oki C332dnw User Manual page 38

ITEM
BINDING
MEDIA CHECK
OVERRIDE A4/LT
RESOLUTION
TONER SAVE TONER SAVE LEVEL
TONER SAVE COLOR
MONO-PRINT SPEED
ORIENTATION
SETTINGS EXPLANATION
LONG EDGE Sets the default binding to SEF or LEF.
SHORT EDGE
ENABLE Determines whether the printer check the size of
paper loaded matches that required for the
DISABLE
document sent to print.
NO If enabled, when the paper size of a job is set to
A4 but there is no A4 set in the printer, if there is
YES
Letter paper in the printer, the job will be printed
on Letter paper without requesting the user to
fill the paper tray with A4 paper.
Similarly, when the paper size of a job is set to
Letter but there is no Letter set in the printer, if
there is A4 paper in the printer, the job will be
printed on A4 paper without requesting the user
to fill the paper tray with Letter paper.
600 DPI Sets the default resolution for printing (dots per
inch).
600 x 1200 DPI
600 DPI M-LEVEL
OFF Set the toner save level.
LOW
MIDDLE
HIGH
ALL Specify toner save for 100% black.
EXCEPT100% All: Enables toner save for all colors.
BLACK
Except 100% Black: Disables toner save for
100% black.
AUTO Sets the monochrome print speed. Prints at the
most appropriate speed for page process if
COLOR SPEED
AUTO is set.
NORMAL SPEED
Prints always at the color print speed if COLOR
SPEED is set.
Prints always at the monochrome print speed if
NORMAL SPEED is set.
PORTRAIT Selects default page orientation between portrait
(tall) and landscape (wide). - (PCL, IBMPPR &
LANDSCAPE
EPSON FX only)
Operator panel > 38