Table of Contents
Advertisement
ITEM
TRAY
MP TRAY
CONFIG
CONFIG
(cont.)
(cont.)
TRAY1
CONFIG
SETTINGS
MEDIATYPE
PLAIN
LETTERHEAD
LABELS
BOND
RECYCLED
CARD STOCK
ROUGH
ENVELOPE
GLOSSY
USERTYPE1
USERTYPE2
USERTYPE3
USERTYPE4
USERTYPE5
MEDIAWEIGHT
LIGHT
MEDIUM LIGHT
MEDIUM
HEAVY
ULTRA HEAVY1
ULTRA HEAVY2
TRAY USAGE
WHEN
MISMATCHING
DO NOT USE
PAPERSIZE
A4
A5
A6
B5
B6
LEGAL14
LEGAL13.5
LEGAL13
LETTER
EXECUTIVE
STATEMENT
8.5"SQ
Folio
16K(184x260mm)
16K(195x270mm)
16K(197x273mm)
CUSTOM
HAGAKI
X DIMENSION
100 MILLIMETER
~
210 MILLIMETER
~
216 MILLIMETER
Operator panel > 27
EXPLANATION
Selects the type of media to be fed from the
multi purpose tray so that the printer can
adjust its internal parameters to better
accommodate the selected type of media.
Note: USERTYPEn are displayed only if
registered in the host PC/Server.
Selects the media weight to be fed from the
multi purpose tray.
If a document to be printed demands a paper
size not installed in the selected tray, the
printer can automatically feed from the multi
purpose tray instead.
If this function is not enabled, the printer will
stop and request the correct size of paper to
be loaded.
Selects the size of paper loaded in Tray 1
(upper tray if both trays installed).
For CUSTOM setting see X DIMENSION and
Y DIMENSION.
Specifies paper width of custom paper as a
default value.
Sets a paper size at right angles to the paper
run direction.
Advertisement
Table of Contents
