Table of Contents
Advertisement
C
ONNECTING VIA WIRELESS
Automatic Setup (Push Button)
If the wireless terminal (computer, tablet,smartphone, etc.) supports WPS-PBC (push
button), then you can use the WPS button to connect via wireless (AP mode).
Follow the procedure below to connect.
1.
Confirm the position of the WPS button in the user's manual provided with the
wireless terminal (computer, tablet, smartphone, etc.).
2.
Turn on the printer.
When SETUP WIRELESS? appears, select NO.
3.
Press up or down on the operator panel to display WIRELESS (AP MODE)
SETTING, and then press the OK button.
4.
Enter the Admin password, and then press the OK button.
(The default password is 999999.)
5.
Select ENABLE, and then press the OK button.
6.
Press up or down on the operator panel to display AUTOMATIC SETUP
(PUSHBUTTON), and then press the OK button.
7.
Select YES, and then press the OK button.
8.
Start WPS-PBC (push button) on the wireless terminal (computer, tablet,
smartphone, etc.).
Once the setup completion screen is displayed, it indicates that the wireless LAN
setup has completed.
LAN (AP
)
MODE
Installing upgrades > 68
Advertisement
Table of Contents
