Specifications - Teac DC-D2700 Owner's Manual

Listening to Record
You can enjoy records (analog discs) by the DC-D2700.
1. Set FUNCTION to PHONO position.
2. Open the record player's cover.
3. Release the tonearm clamp and open the needle
guard.
4. Place a record on the platter cover the central
spindle.
* Place the EP adaptor over the central spindle when
playing 7" (17 cm) EP records.
5. Set the Speed selector to the appropriate speed; 33
or 45 rpm.
6. Lift the tonearm, move it to the first track of the
record.
The turntable starts rotating.
7. Place the needle gently on the record.
Playback starts.
8. At the end of the record, the turntable will automati-
cally stop. Lift the tonearm back to the tonearm
clamp and remove the record.
To stop playback on the way:
Lift the tonearm from the record and return it to the
clamp.
Notes:
... Do not turn or attempt to stop the platter by hand.
... Moving the unit without securing the tonearm may
damage the needle.
Center Spindle
Turntable Platter
7" EP Record
adaptor
Tonearm
Speed Select
switch
Tonearm Rest /
Clamp
Headshell

Specifications

[AMPLIFIER Section]
Output Power:
Frequency Response:
[TUNER Section]
FM Section
Frequency Range:
AM Section
Frequency Range:
[CD PLAYER Section]
Frequency Response:
Signal to Noise Ratio:
[CASSETTE DECK Section]
Track System:
Tape Speed:
Wow and Flutter:
Frequency Response:
[SPEAKER SYSTEM Section]
Type:
Impedance:
Input Power:
[GENERAL]
Power Requirements:
Power Consumption:
Dimensions (W x H x D): 350 x 430 x 355 mm
Weight (net):
Standard Accessories:
Remote Control Unit (RC-669) x 1
Owner's Manual x 1
Warranty Card x 1
- 14 -
5 W + 5 W (U.S.A./Canada)
60 to 30,000 Hz
87.50 to 108.00 MHz
530 to 1710 kHz
(U.S.A./Canada)
20 to 20,000 Hz ±3 dB
65 dB (IEC-A)
4 tracks, 2 channel stereo
4.8 cm/sec.
0.4 % (WRMS)
125 to 6,300 Hz - 6 dB
2-way
4 ohms
Max. 10 W, Nominal 5 W
120 V AC, 60 Hz
(U.S.A./Canada)
30 W
8.5 kg