Table of Contents
Advertisement
NLCleaning and maintenance
Fit the pump cover.
4.
Check that the pump cover
‒
components are fitted correctly.
Tighten the pump cover up to the
5.
stop.
90°
The handle of the pump cover
must be vertical.
Insert and close the service cover.
6.
2
1
44
Before next wash
To prevent unused detergent from
flowing into the drain during the next
wash, run a suitable draining program
after emptying the pump.
Open the water tap.
1.
Insert the plug into the socket.
2.
Turn on the device.
3.
Put a liter of water in the manual
4.
dosing compartment.
Select a suitable program for
5.
draining.
→ "Programs", page 28
Advertisement
Table of Contents
