Settings; Laundry; Dosing Detergent And Fabric Care Product - Bosch WAU28P02NL User Manual And Installation Instructions

NLService
Adjust the program settings.
▶
→ "Buttons", page 25
Take the information on the
subject of operating logic
→ Page 19 in mind.
Comments
¡The program settings are
not permanently stored for the
program.
¡When you use the intelligent dosing
activates or deactivates the
system, the setting is saved.
13.4 Save program settings
You can save your individual program
settings as a favourite.
Requirements
¡A program is set.
→ "Set program", page 33
¡The program settings are
amended.
→ "Adjust program settings", page
33
Press for approx. 3 seconds.
▶
Press to save it
program.
Remark:To overwrite the stored
program, repeat the steps.
13.5 Filling the drum with

laundry

Remark:To avoid creasing, please
observe the maximum load of the
programs.
→ "Programs", page 28
34
Requirements
¡The laundry is prepared and
sorted.
→ "Laundry", page 32
¡The drum is empty.
Open the door.
1.
Place the laundry in the drum.
2.
Close the door.
3.
Make sure that no small items of
laundry are caught in the door.
13.6 Dosing detergent and
fabric care product
For programs where intelligent dosing
is not possible or desired, you can
dose the detergent manually.
Tip:In addition to the intelligent
dosing, you can also add other
laundry care products in the manual
dosing compartment, such as stain
removers, starch or bleach. Do not
add additional detergent in the
manual dosing compartment to avoid
overdosing or foaming.
Remark:Follow the instructions for
detergent and fabric care → Page 33
On.
Pull out the detergent drawer.
1.
Fill with detergent.
2.
→
"Detergent drawer", page 18
Fill with detergent if desired.
3.
Slide the detergent drawer into the
4.
appliance.