Table of Contents
Advertisement
1886
The remote control is
already paired for use. For
your convenience, a remote
function card is packed in
with your remote.
NOTICE
• Always purchase the correct size and
grade of battery most suitable for the
intended use.
• Replace all batteries of a set at the same
time.
• Clean the battery contacts and also those
of the device prior to battery installation.
• Ensure the batteries are installed
correctly with regard to polarity (+ and -).
• Remove batteries from equipment which
is not to be used for an extended period
of time.
• Remove used batteries promptly.
9
Ceiling Bracket
Hanging Fan
Preparing the Remote
To access the battery
compartment, remove the
small Phillips head screw that
secures the battery door to
the transmitter assembly. The
battery should be installed
with the positive (+) side
up. Replace with a CR2032
battery when necessary.
Battery
Door
Phillips
Head
Screw
Wiring
Installing Fan Body
Key Press
Function
+ Quick Press
Light On/Off
+ Long Press
Light Dimming
+ Quick Press
Fan On/Off
+ Quick Press
Raise Fan
Speed
Lower Fan
+ Quick Press
Speed
Long Press
+
Fan Updraft
Fan Downdraft
Long Press
+
Long Press
+
Enable Beep
Long Press
+
Disable Beep
Long Press
Dimming Mode
+
On/Off
Blades
Light
ON
Remote
App
Advertisement
Table of Contents
