Table of Contents
Advertisement
- "Auto" and the duration alternately, if programming is
GB
automatic.
4. Press the
5. The oven will begin its preheating phase, the preheating
indicators will light up as the temperature rises.
6. When the preheating process has finished, a buzzer
sounds and all the preheating indicator lights show that
this stage has been completed: the food can then be
placed in the oven.
7. During cooking it is always possible to:
- modify the temperature by turning the THERMOSTAT
knob (manual modes only);
- set the duration of a cooking mode (see Cooking
Modes);
- press the
button to stop cooking. In this case the
appliance stores the temperature modified previously in
its memory (manual modes only);
-
switch off the oven by pressing the
for 3 seconds.
8. If a blackout occurs while the oven is already in
operation, an automatic system within the appliance will
reactivate the cooking mode from the point at which it
was interrupted, provided that the temperature has not
dropped below a certain level. Programmed cooking
modes which have not yet started will not be restored
and must be reprogrammed (for example: a cooking
mode has been programmed to start at 20:30. At 19:30
a blackout occurs. When the power supply is restored,
the mode will have to be reprogrammed).
! There is no preheating stage for the GRILL mode.
! Never put objects directly on the bottom of the oven;
this will prevent the enamel coating from being damaged.
! Always place cookware on the rack(s) provided.
Cooling ventilation
In order to cool down the external temperature of the
oven, a cooling fan blows a stream of air between the
control panel and the oven door, as well as towards the
bottom of the oven door.
! Once cooking has been completed, the cooling fan
continues to operate until the oven has cooled down
sufficiently.
Oven light
The light comes on when the oven door is opened or
when a cooking mode starts.
The
button can be used to switch on /switch off the
light at any time.
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24
10
button to begin cooking.
Residual heat indicators
The appliance is fitted with a residual heat indicator. When
the oven is off, the "residual heat" bar on the display lights
up to indicate high temperatures inside the oven cavity.
The individual segments of the bar switch off one by one
as the temperature inside the oven falls.
Restoring the factory settings
The oven factory settings can be restored to reset all
selections made by the user (clock and customised
durations). To carry out a reset, switch off the oven, then
keep the SELECTOR knob turned while pressing the
button for 6 seconds. Once the restore procedure
is complete, a buzzer will sound. The first time the
button is pressed, the oven will behave as if it is being
switched on for the first time.
Standby
This product complies with the requirements of the
button
latest European Directive on the limitation of power
consumption of the standby mode. If no buttons are
pressed for 30 minutes and the control panel lock has
not been activated, the appliance automatically reverts
to standby mode. The standby mode is visualised by
the high luminosity "Watch Icon". As soon as interaction
with the machine resumes, the system's operating mode
is restored.
pull (2).
WARNING! The oven is
provided with a stop system
to extract the racks and
prevent them from coming
out of the oven.(1)
As shown in the drawing,
to extract them completely,
simply lift the racks, holding
them on the front part, and
Advertisement
Table of Contents
