Initializing Qts Using Qfinder Pro - Samsung TS-1655 User Manual

Method
Qfinder Pro If the NAS is connected to your local area
installation network, you can do the following:
(Recommended)
For details, see
Qfinder
Cloud installation If the NAS is connected to the internet,
you can do the following:
For details, see
cloud installation

Initializing QTS using Qfinder Pro

You can initialize QTS using Qfinder Pro, which is an utility designed to help you locate and manage QNAP
devices on your network.
Warning
Initializing QTS deletes all data on the drives. Back up your data before proceeding.
1. Power on the NAS.
2. Connect the NAS to your local area network.
3. Run Qfinder Pro on a computer that is connected to the same local network.
Tip
To download Qfinder Pro, go to https://www.qnap.com/utilities.
4. Click Next.
The QNAP Warranty Service page opens in the default web browser.
5. Click Check warranty.
The QNAP Warranty Service window opens in a new web page.
Important
You can check your device warranty policy or purchase an extended warranty plan at
Warranty Service.
6. Close the warranty page.
The Smart Installation Guide opens in the default web browser.
Description
• Locate the NAS using Qfinder Pro.
• Complete the steps in the Smart
Installation Guide wizard.
Initializing QTS using
Pro.
• Scan the QR code on the NAS.
• Log into your myQNAPcloud account.
• Use myQNAPcloud Link to remotely
access your NAS.
• Complete the steps in the Smart
Installation Guide wizard.
Initializing QTS using the
website.
Requirements
• Computer
• Network cable
• Qfinder Pro installer
• Computer or mobile device
• Network cable
• myQNAPcloud account
• Cloud Key
Installation and Configuration
TS-1655 User Guide
QNAP
49