Table of Contents
Advertisement
7. If the screen shows a different operating system, click QTS.
Note
This step is only required if the NAS supports installing more than one operating system and
the default operating system for installation is not QTS.
The NAS restarts and the smart installation screen shows QTS as the operating system to install.
8. Click Start Smart Installation.
9. Specify a firmware version using any of the following methods.
Methods
Current version
Latest available version
Uploaded version
10. Click Next.
The Enter the NAS name and administrator's password screen appears.
11. Specify the following information.
• NAS Name: Specify a name with 1 to 14 characters. The name can contain letters (A to Z, a to z),
numbers (0 to 9), and hyphens (-), but cannot end with a hyphen.
• Username: Specify an administrator username that contains 1 to 32 characters. The name can
contain letters (A to Z, a to z), numbers (0 to 9), and hyphens (-), multi-byte Chinese, Japanese,
Korean, and Russian characters.
The username cannot contain the following special characters: grave accent (`), asterisk (*), equal
sign (=), plus sign (+), square brackets ([ ]), curly brackets ({}), slash (\), vertical bar (|), semicolon
(;), colon (:), apostrophe ('), quotation mark ("), comma (,), less than sign (< ), greater than sign (>),
backslash (/), question mark (?), percent sign (%), dollar sign ($), and the space character.
Important
To protect your NAS from brute force attacks, create a new system administrator account
during QTS initialization to disable the default "admin" account.
• Password: Specify an administrator password with 1 to 64 characters. The password can contain
any ASCII characters.
• Confirm Password: Enter the new administrator password again.
12. Click Next.
The Set the date and time screen appears.
13. Specify the time zone, date, and time using any of the following methods:
User Actions
Select Current version.
a. Select Latest available version.
b. Click Check for Update
The system checks for the latest firmware update
available for your device. If a newer version is
available, the system downloads the firmware update
and restarts the NAS.
a. Select Uploaded version.
b. Click Browse.
The file upload window appears.
c. Select a firmware file.
TS-1655 User Guide
Installation and Configuration
50
Advertisement
Table of Contents
