Table of Contents
Advertisement
4. Remove the case cover.
For details, see
Removing the case
5. Remove the fan module.
For details, see
Removing the fan
6. Remove an existing module.
a. Push the retention clips outward simultaneously to release the module.
b. Hold the module by the edges.
Warning
Attempting to remove a module that is not completely released may damage the module and
the system board.
7. Install a new module.
Warning
• Do not touch the internal components, particularly the metal connectors.
• Do not bend the module.
a. Align the notch with the ridge in the slot.
b. Insert the module into the slot.
c. Verify that the metal connectors are completely inserted into the slot.
d. Carefully press down on the module until the retention clips lock the module into place.
cover.
module.
TS-1655 User Guide
Installation and Configuration
30
Advertisement
Table of Contents
