Category
Tools
Setting up the NAS
Important
Read all safety requirements and information carefully before setting up the NAS or
installing NAS components.
1. Place your NAS device in an environment that meets the requirements.
For details, see
Installation
2. Install drives.
For details, see the following topics:
•
Installing 3.5-inch hard drives on 3.5-inch trays
•
Installing 2.5-inch solid-state drives on 3.5-inch trays
•
Installing 2.5-inch solid-state drives on 2.5-inch trays
•
Installing M.2 solid-state drives
3. Optional: Replace or install additional memory modules.
For details, see
Replacing memory
4. Optional: Install expansion cards.
For details, see
Installing expansion
5. Optional: Connect expansion units.
For details, see the following topics:
•
Connecting SATA JBOD expansion units
•
Connecting USB expansion units
6. Connect the power cord and all applicable cables.
7. Power on the NAS.
8. Install QTS.
For details, see
QTS
9. Log on to QTS.
• Phillips #1 or #2 screwdriver
• Anti-static wrist strap
requirements.
modules.
cards.
installation.
Item
Product Overview
TS-1655 User Guide
14